Search: . ACCUSPLIT Alliance 1540 Activity Pedometer Counts steps walked or jogged up to 1,000,000 steps (0 to 999,999 & rollover) Computes the distance walked or jogged up to 10,000 miles or km (0.000 to 999.999 then to 9,999.99 & rollover) Stride setting for more accurate distance calculation (1-7 feet by 0.05 foot or 30 to 215 cm by one cm) 5-Year No Proof of Purchase Warranty Includes safety pedometer leash   Operating Instructions: Reset and Power Reset * Push RESET button for two seconds and release to reset all results to zero. * Push RESET button for five seconds and release, when display goes blank, to reset results and to switch unit of measure (miles or kilometers). Step Count Mode (Step) * Displays all the step count activity since last reset. * Press MODE for Distance Mode. Distance Mode (ML or KM) * Press SET to enter the Step Length Setting Mode. * Press SET to increase Step Length by 0.05 ft. (0.6 in) from 1-7 feet or by one cm. from 30-215 cm. * Press MODE to exit the Setting Mode and to go to Step Mode. Exclusive Distance Accuracy Tip * After setting Stride Length per instructions above, maximize the accuracy of Distance measurement by: * Walking a measured 0.5 or 1.0 mile/km (we recommend that you use a 1/4 mile/400 meter track like those found at a high school * Comparing the DISTANCE recorded to the measured distance, and if UNDER recorded, resetting the STEP LENGTH to a longer setting, or if OVER recorded, resetting the STEP LEGTH to a shorter setting. * Reset display to zero * Walking the track again to test the adjustment, and readjusting accordingly. * Once adjusted DO NOT ALLOW ANYONE ELSE TO CHANGE THE SETTING because the Activity Pedometer is now set for your style. * You are now ready to walk any route, change that route freely and still get an accurate measurement of distance for your fitness or recreation program. Battery type for replacement: * LR-44 ACCUSPLIT Alliance 1540 Activity Pedometer includes: * Pedometer * Extra battery * Safety leash * Operating instructions